TSS-1500 Series and TSS-1800 Series |
TSS Series is one kind of thermosiphon split solar collectors which has same working principle with thermosiphon solar water heater (TS Series), but without big and round water tank.
TSS series is assembled by tubes, manifold and stand. The small inner tank of TSS manifold is made by high quality round stainless steel pipe and holes are made well on the pipe. When installed, basic frame is assembled first and then insert tubes.
TSS can be divided into two main types, vertical type and latitude type. TSS series is widely used in China, especially for large scale solar hot water system. When make solar hot water projection with TSS series, an additional water tank/boiler is needed according to the projection requirement. Bellowed is some information on TSS series.
Model |
TSS-25-1500-V |
TSS-24-1800-V |
TSS-50-1500-L |
TSS-48-1800-L |
Tube Type |
Φ47 x 1500 mm |
Φ58 x 1800 mm |
Φ47 x 1500 mm |
Φ58 x 1800 mm |
Tube Quantity |
25 |
24 |
50 |
48 |
Tube Direction |
Vertical |
Vertical |
Latitude |
Latitude |
Absorb Area |
1.295 m2 |
1.918 m2 |
2.59 m2 |
3.836 m2 |
Tube Angle with Latitude |
90 ℃ |
90 ℃ |
3 ℃ |
3 ℃ |
Insulation |
Polyurethane Foam |
Stand Frame |
SS |
Test Pressure |
<1.5 kg/cm² (about 1.5 Bar) |
System Pressure |
<1 kg/cm² (about 1 Bar) |
Daily Efficiency |
≥55% (≥42% in winter) |
FOB Price (USD) |
Please Contact us |
Price has included the cost of SS stand frame and Gaia can design TSS according to clients’ requirement on the number of tubes. |
|